Schmalz SCTMi IO-Link Operating Instructions Manual Download Page 6

Page: 6 / 54

SAFETY INSTRUCTIONS

6 | EN

www.schmalz.com

30.30.01.02629/00

1 Safety Instructions

1.1 Classification of safety instructions

Danger

This warning informs the user of a risk that will result in death or serious injury if it is not avoided.

DANGER

Type and source of danger

Consequence

► Remedial action

Warning

This warning informs the user of a risk that could result in death or serious injury if it is not avoided.

WARNING

Type and source of danger

Consequence

► Remedial action

Caution

This warning informs the user of a risk that could result in injury if it is not avoided.

CAUTION

Type and source of danger

Consequence

► Remedial action

Attention

This warning informs the user of a risk that could result in damage to property if it is not avoided.

ATTENTION

Type and source of danger

Consequence

► Remedial action

Summary of Contents for SCTMi IO-Link























































Search results

Summary of Contents for SCTMi IO-Link

Reviews:

Related manuals for SCTMi IO-Link

Brands by name

Popular brands

Schmalz SCTMi IO-Link, Operating Instructions Manual

Search results

Summary of Contents for SCTMi IO-Link

Reviews:

Related manuals for SCTMi IO-Link

Brands by name

Popular brands