Schmalz SCPi FS RP, Operating Instructions Manual

Page: 55 / 58

IO-Link Data Dictionary SMP FS RP
21.10.01.00115/00 13.03.2018
J. Schmalz GmbH
Aacher Straße 29, D 72293 Glatten
Tel.: +49(0)7443/2403-0
Fax: +49(0)7443/2403-259
info@schmalz.de
IO-Link Implementation



40 0x0028 0 2 bytes ro Copy of currently active process data input
64 0x0040 1 2 bytes ro Actual sensor value
64 0x0040 2 2 bytes ro Lowest measured sensor value since power-up
64 0x0040 3 2 bytes ro Highest measured sensor value since power-up
66 0x0042 1 2 bytes ro Supply voltage as measured by the device (unit: 0.1 Volt)
66 0x0042 2 2 bytes ro Lowest measured supply voltage since power-up
66 0x0042 3 2 bytes ro Highest measured supply voltage since power-up

564 0x0234 0 1 byte ro
0x00 = SIO mode
0x10 = IO-Link revision 1.0 (set by master)
0x11 = IO-Link revision 1.1 (set by master)

140 0x008C 0 cc1 4 bytes ro Switch-on counter for switch point 1 (non-erasable)
141 0x008D 0 cc2 4 bytes ro Switch-on counter for switch point 2 (non-erasable)
143 0x008F 0 ct1 4 bytes ro Switch-on counter for switch point 1 (erasable)
144 0x0090 0 ct2 4 bytes ro Switch-on counter for switch point 2 (erasable)


32 0x0020 0 2 bytes ro Number of errors since last power-up
36 0x0024 0 1 byte ro
0 = Device is operating properly
1 = Maintenance required
2 = Out of specification
3 = Functional check
4 = Failure
37 0x0025 1-15 15 x 3 bytes ro
Information about currently pending events
Fixed-length array format according to IO-Link specification V1.1
130 0x0082 0 1 byte ro
0 = No error
1-99 = Error code displayed by the device
138 0x008A 1 1 byte ro Type code of active device status (see below)
138 0x008A 2 2 bytes ro ID code of active device status (see below)

146 0x0092 0 Condition Monitoring 1 byte ro
Bit 2: Leakage rate above limit -L- (not for VSi P10)
Bit 5: Primary voltage US outside of optimal range
160 0x00A0 0 Actual Leakage Rate 2 bytes ro Leakage rate, unit mbar/sec (not for VSi P10)
Supply Voltage
Error Count
Condition Monitoring [CM]
Sensor Value
Sensor Value HI
Monitoring
Process Data In Copy
Observation
Counter cc2
Diagnosis
Device Status
Supply Voltage LO
Sensor Value LO
Detailed Device Status
Supply Voltage HI
Counter ct1
Counter cc1
IO-Link Device Status
Communication Mode
Active Error Code
Counter ct2
Extended Device Status - Type
Extended Device Status - ID
Process Data
Communication Mode
Counters
J. Schmalz GmbH 5 of 6 VSi Data Dictionary