Appendix
EN-US · 30.30.01.01963 · 00 · 05/19
49 / 52
15 Appendix
15.1 Overview of Display Codes
Display
code
Parameter
Comment
5P1
Switching point 1
Value at which the control function deactivates
rP1
Reset point 1
Reset value 1 for the control function
5P2
Switching point 2
Activation value of “Parts control” signal output
rP2
Reset point 2
Reset value 2 for the “Parts control” signal
tbL
Blow off time
Set the blow off time for time-controlled blow off
CAL
Zero-point adjustment
Calibrate the vacuum sensor
EF
Extended functions
Open the “Extended Functions” submenu
1mF
Information
Open the “Info” submenu
cc1
Counter 1
Counter for suction cycles (suction signal input)
cc2
Counter 2
Counter for valve switching frequency
5oc
Software
Displays the software version
5nr
Serial number
Displays the serial number of the ejector
Art
Article/part number
Displays the part number of the ejector
uni
Vacuum unit
Vacuum unit in which the measurement and setting values are dis-
played
bAr
Vacuum level in mbar
The displayed vacuum is shown in mbar.
P5i
Vacuum level in psi
The displayed vacuum level is shown in psi.
iX9
Vacuum level in inHg
The displayed vacuum is shown in inches of Hg.
k
PA
Vacuum level in kPa
The displayed vacuum level is shown in kPa.
t-1
Max. permissible evac-
uation time
Set the maximum permitted evacuation time
-L-
Max. permissible leak-
age
Set the maximum permissible leakage in mbar/s
Ctr
Control
Set the air saving function (control function)
rE5
Reset
All values are reset to the factory settings.
1nc
Inconsistent
The entered value is not within the permissible value range.
This is an informational message that appears if incorrect informa-
tion is entered.
0or
Out of range
Input value invalid
