Schmalz Blower Box SBB Operating And Maintenance Instructions Manual Download Page 14 | Manualshive

Page: 14 / 22

Schmalz Blower Box SBB Operating And Maintenance Instructions Manual Download Page 14

INSTALLATION

14 | EN

www.schmalz.com

30.30.01.00159/01

5

Installation

Please read section 1.6 (Requirements & instructions for installation,
maintenance and operating staff) before starting installation.

5.1 Mounting with vacuum pump

Tools required:



Allen key, size 5



Wrench in size 10, 25, 32, 36



Alternatively pipe wrench (for size 32 and size 36)

Image

Work step description

1

1. Remove the cover from the

Schmalz Blower Box.

2. Position the base plate at the

intended installation location.

Important:

If the Schmalz Blower Box is

used, the vacuum pump may only be
installed in a horizontal position. The base
plate must be securely connected to the
support with 4 screws.
Exception: The blower does not have to be
secured for floor mounting.

2

Remove the cover from the Schmalz Blower
Box.

3

Drilling template for EVE-TR 25 (1)
Drilling template for EVE-TR 40 / 50 (2)

«
...
12
13
14
15
16
...
»

Summary of Contents for Blower Box SBB























Reviews:

No comments