Schmalz Blower Box SBB Operating And Maintenance Instructions Manual Download Page 12

DELIVERY, PACKAGING AND TRANSPORT 

12 |   EN 

www.schmalz.com 

30.30.01.00159/01 

4  Delivery, Packaging and Transport 

4.1  Delivery 

Refer to the order confirmation for specific details about what is included in delivery. The weights and 
dimensions will be listed in the delivery notes. 
Check the entire delivery against the supplied delivery notes to make sure nothing is missing. 
Following delivery of the shipment, damage caused by defective packaging or in transit must be 
reported immediately to the carrier and J. Schmalz GmbH. 
 

 

The operating and maintenance instructions are an integral part of the 
Schmalz Blower Box and must accompany the device whenever it moves to 
a new location. 

4.2  Packaging 

Depending on the scope of the shipment, the Schmalz Blower Box is transported either in a cardboard 
box or wooden crate, or on a pallet. 

 

The packaging material must be disposed of in accordance with country-
specific laws and guidelines. Labeled transport aids and safety mechanisms 
must be removed. 

4.3  Transport with mounted vacuum generator 

 

 

WARNING 

 

 

 

Risk of injury from falling objects. 

► 

Ensure that the vacuum generator is securely connected to the main body 
(item 1) before lifting. 

 

1.  Remove the cover (item 2) of the SBB. 
2.  Lift the main body and vacuum generator together 

using a pump ring (vacuum pump) or a suitable sling 
(blower). 

 

.

 

 

 

 

WARNING 

 

 

 

 

Risk of injury due to improper transportation and unloading. 

► 

Unloading and transport must only be carried out by trained forklift truck drivers

 

who have also completed all the necessary safety training. 

► 

Only use hoists and slings that have the necessary specifications. 

► 

Secure transport materials in accordance with country-specific regulations 
(BAG guidelines in Germany). 

► 

Wear personal protective clothing. 

Summary of Contents for Blower Box SBB























Reviews: