E n d o P i l o t
*related to the additional module “CoPilot”
- 25 -
609 2201 v12 www.schlumbohm.de
8.
-
. Setup-Functions
7. Calibration
8.
Setup CoPilot
9. Reset
10
.
Setup
previous menu
7. Contra-angle calibration
After each sterilization and each change of the contra-angle the function "1:1 contra-angle calibration" should be called
up. Hereby slight torque losses at the contra-angle could be set off. This function always allows a safe operate at low
torque limits. If the calibration is not possible, the contra-angle is very dirty or damaged. In this case, please contact the
manufacturer.
8. Setup CoPilot / Wireless foot switch*
In the
CoPilot
menu the following settings can be made:
CoPilot active
/
inactive
With this setting you can select if the functions of the *CoPilot module can be used.
The key “active” connects EndoPilot and CoPilot. The key “inactive” disconnects them.
If the EndoPilot shall be used again without the CoPilot and if the connection cable (15e)
has been disconnected the EndoPilot will detect the absence of the CoPilot module and
will automatically set the function to “inactive”.
If the ultrasonic function is inactive, the key “ultrasonic” is blocked in the main menu.
A u t o o f f
With this function you can determine the period after which the device automatically turns
off. You can choose between 10, 20 and 40 minutes.
W i r e l e s s F o o t S wi t c h
In general, the wireless foot switch and the CoPilot module have already been matched prior
to delivery. In case a new wireless foot switch shall be used, then the switch and the device
still have to be matched to each other. With the function
wireless foot switch
, the new
switch can be paired.
To do so, press the key “wireless foot switch” on the display and select
teach-footswitch
.
Now use the foot switch several times in a row. After a while the device will show “wireless-
footswitch found”.
It is also possible to deactivate existing wireless foot switches, resp. to delete them from the
database.
To do so, press the key “wireless foot switch” and select
delete all
.
C o P i l o t I n f o r m a t i o n
For service questions, further information on the CoPilot module can be shown here.
