E n d o P i l o t
*related to the additional module “CoPilot”
- 17 -
609 2201 v12 www.schlumbohm.de
File alarm!
Reset the counter
4.4.
Selection of a sequence / file
4.2 File system
4.4 Sequence / File
After selecting the file system, the system overview opens.
The general structure is the same for all systems, it differs,
however, by particularities and sequences of the individual file
system resp. manufacturer.
With ProFile (see illustration), for example, the sequence is
selected first and in the next step the file.
The file system ProTaper Next does not offer this sequence
selection. A file selection is offered directly
.
In the selected file system, a touching of the headline with the system name (in our illustration P r o F i l e resp.
ProTaper Next
) leads back to the menu „favorites“. With the
key, you can return to the Start Menu
.
4.5. Preparation
In the preparation menu, the EndoMotor is operated via the foot switch. The upper line shows the selected file.
Underneath, the speed and torque values of the file are shown.
The Apex screen is always displayed which enables a manual probing with the help of the file clamp. Please note that
the file clamp has to be put down on an isolated surface as otherwise it may cause mistakes in the root canal
measurements with the contra-angle.
The settings which are valid for the entire preparation can be selected in the menu O p t i o n s (chapter 4.7 ).
With the F . D a t a -key, you reach the sub-menu file parameters. It offers the possibility to change the individual
parameters for the selected file (Chapter 4.6 file parameters).
Selected file,
back to file sequence
(see chapter 4.4.)
Preparation line
(see chapter 3.)
Go to next or previous
Box sel Wear indicator
file of the sequence
(File Management – only
visible after selection of a limit)
