E n d o P i l o t
*related to the additional module “CoPilot”
- 15 -
609 2201 v12 www.schlumbohm.de
3.1.
Advice for an accurate Measurement
Put on the lip clip (4c) in the cheek pouch of the patient (the side which is opposite to the operating area).
Before you start the length measurement, the root canal should be rinsed with NaCl-solution and then be dried (for
example with a cotton-pellet), in order to avoid leakage current and, as a consequence, incorrect measurements.
It is recommended to wear protective gloves during the measurement in order to isolate the measuring current.
For the manual measurement, the file has to be connected with the file clamp below the shaft and shall be inserted
slowly into the root canal.
Please keep in mind that, principally, mismeasurements may occur during the electronic canal measurement caused by
variable disturbances (conductive fillings, cracks in the tooth, etc.)
The results should always be compared with an x-ray photo.
4. Motor system
When selecting the motor system, you will reach the Favorites menue.
4.1Favorites
System ‘ProTaper’ chosen as example for a favorite
(can be deleted again with X )
Space for an other system
(press file file symbol)
4.3 MyFile System
4.2 Selection of a file system
4.1. Favorites
The menu favorites offers the possibility to select from a wide range of pre-programmed file systems 3 favoured file
systems.
This offers the advantage of immediate access to the file systems used most of the times and saves the repeated
selection from the whole assortment of file systems.
The favoured file system is selected by pressing the file symbol
.
Via the symbol X the selection can be deleted easily and can then be selected anew.
This menu does not have to be used.
If you do not want to select any favorites, choose the menu item „all file systems“ (Chapter 4.2)
Here, a system can be chosen directly from the alphabetical list of file systems.
