Pilot²
- 40 -
16. Technical Data
Type:
Power supply
1
:
Electrical protection class:
Bluetooth transmission:
FCC ID:
Output: Basic device
Use:
Speed Endomotor:
Torque:
Device class:
IP protection class:
MD / EU class:
Environmental conditions:
For the company:
For the transport:
Battery type:
Weight:
Dimensions:
height
x
width
x
depth
EndoPilot²
Input: 100 - 240 V/AC (50-60 Hz)
Output: 12 V DC / 1.5 A
Power supply unit for medical devices
according to: IEC 60601-1 and IEC 60601-1-2
(Only use the original EndoPilot² power supply unit)
Charge the device regularly, at least every 6 months
II
2.402-2.480 GHz, TX Power: +7 dBm
T9JRN4020
Max. 3 V / 5 A or 12 V / 1.25 A (direct current)
The device is intended for short-term operation
Motor: 30 seconds full load / 1 minute rest
Ultrasound:
1 minute operation at maximum power, 3 minutes cooling time
4 minutes operation at minimum power, 6 minutes cooling time
(forced shutdown after 1 - 90 seconds depending on the
selection)
DownPack:
5 seconds operation at the maximum temperature, 5 seconds
cooling time (forced shutdown after 5-30 seconds depending
on the power setting)
BackFill:
15 minutes operation at the maximum temperature, 5 minutes
Cooling time (forced shutdown after 15 minutes of continuous
operation)
200-1000 rpm +/- 10%
Max. 5 Ncm +/- 10%
Class according to EN 60601- 1: Type BF applied part
The device must not be operated in potentially explosive
atmospheres
Keep the device away from combustible material.
IP31 EndoPilot² and wireless foot switch
IP31 ultrasonic extension
IP40 power supply unit
IIa
Air pressure 800 hPa to 1060 hPa
+15°C to +40°C / air moisture: 20-80%, non-condensing
-15°C to +60°C / air moisture: 20-80%, non-condensing
Li-Ion battery, 7.2 V, power output: 48 Wh
1450 g EndoPilot² control unit
19 cm x 20.5 cm x 17.5 cm (basic device)
Subject to technical changes!
1
No other power supply units may be used. The power supply unit is relevant to safety!
