Pilot²
Doc. No. 610 2221 v07
- 33 -
(*applicable with the ultrasonic extension module)
7. - 11. Setup functions
7. Software release and updates
You can find the device data and software release here.
Updates can be made using the microSD card.
8. Brightness / Volume
Setting the brightness
Setting the volume
9. Setting the language
Here, you can choose the language
10. Auto-off time
Setting the switch-off time
Open the service menu with further
information (chapter 11)
11. Service information / Bluetooth
This data indicates the device state.
This data is helpful in the event of an error.
If you want to connect a new footswitch, press it.
The foot switch is added with the Save button. The green
‘Detected’ message appears when the added foot switch
is pressed again.
On the right side you will find the battery voltage of the
switch. Low voltage (under 1,4V) will lead to an
interruption and a loss of function. Keep fresh batteries in
stock and replace low batteries immediately.
You can use the keypad to activate further functions or
query the settings.
By resetting, all file parameters are reset to the factory
settings. Caution! Changes made by the user are
deleted.
Software Updates:
Updates are easy to perform with the help of the microSD card. Software-updates are
provided on company supplied microSD cards.
For details see Update Instruction document 610 2206
Caution! Never insert microSD cards with unknown contents into the device.
