Form 57033 Rev. A
01-05-2004
7
VIP 5500 OPEN ARCHITECTURE MORTISE LOCK
INSTALLATION MANUAL
7. INSTALL OUTSIDE SPINDLE, OUTSIDE ESCUTCHEON AND BASE PLATE ASSEMBLY:
Install outside escutcheon and spindle then install base plate assembly onto inside of door. Use socket cap screws with
washers on top standoffs and phillips head screws on lower standoffs. Note that the cam on the outside escutcheon must
be positioned with the dot at the 6 o’Clock position and outside spindle must be inserted as shown in details.
NOTE: Battery Powered inside baseplate shown.
OUTSIDE SPINDLE MUST BE
INSERTED AS SHOWN
SOCKET CAP
SCREW
,
WASHERS
5/32” HEX
WRENCH
BASE PLATE ASSEMBLY
PASS WIRING HARNESS THROUGH
1”
HOLE IN DOOR
PHILLIPS HEAD
SCREWS
DOT
-
FACES
DOWN
OUTSIDE
SPINDLE
POSITION
CAM
DETAIL
IMPORTANT!
DO NOT OVERTIGHTEN
FASTENERS OR DOOR
WILL COMPRESS.
