Quantum™ äd
ə
s
ē
®
RFID Installation Instructions
Pg. 1 of 8
Quantum
™
ädes
ē
®
(Odyssey) RFID
Installation Instructions
All parts needed to install the Quantum™ äd
ə
s
ē
®
RFID lock are included with each unit. Please check to
make sure all parts are accounted for before beginning installation. Do not substitute any of the parts. The
use of substitute parts will result in poor performance of the lock.
of the lock.
Screw Pack
(A29050-COLOR)
Proximity Reader Assembly
(A20910-COLOR)
Gear Box
For the standard
mortise only
(24012-1)
Outside Lever Trim
(A20970-HAND-COLOR)
Mortise Lock
(A59810-HAND-G)
Mortise, Std.
OR
(A59850-HAND-G)
Mortise, ADB
OR
(A60000-HAND-G)
Mortise, MT, STD, DAJ
OR
(A59990-HAND-G)
Mortise, MT, ADB, DAJ)
Scalp Plate
(51190-COLOR)
Strike Plate
(30320-HAND-COLOR)
Inside Trim Assembly
(QP12XXX-6-XX)
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
© SAFLOK™
INS_QTMADESERFID
2/16/2012
