![background image](http://html.mh-extra.com/html/bosch/el800a/el800a_user-manual_41288001.webp)
IMPORTANT NOTICE
Please read this user manual carefully. It contains important information
on the Smart Door Lock and maintenance.
Make sure that the mechanical key is kept in a safe place outdoors, i.e.
inside your car, office etc.
Do not expose the lock to rain, sunlight and outdoor environments.
Do not try to repair/disassemble the lock to avoid unnecessary loss.
Do not hit the lock with any hard objects.
Make sure that the door is properly locked when you are going out.
Do not use water or any chemical substances such as oil or benzene to
clean the lock. This will result in short circuit, ageing and/or paint
stripping.
Make sure to change your PIN Code regularly.
Do not use rechargeable batteries for the lock. This product is only
compatible with alkaline batteries.
The virtual PIN Code is up to 32 digits. E.g. Actual PIN Code + **** or **** +
Actual PIN Code (Do not key in garbled character before or after the virtual
PIN Code).
If the touch screen is out of order, try to restart the device with the
emergency power supply below, which is connected to the Micro-USB.
When using the key to open the lock, please turn the key back to its
original position before removing it.
Please follow the above instructions to avoid any injuries and/or damages
on the lock.
USER MANUAL
BOSCH SMART LOCK
Do not put any flammable material such as gas, paint, gasoline,
etc, near the smart lock to avoid explosion and fire, including
explosive materials such as alcohol, gasoline, etc.
We are not responsible for any damage or property loss resulting
from improper installation, readjustment, use and/or repair by
user or third parties.
EL800A
PRODUCT INTRODUCTION
OUTER BODY PARTS
INNER BODY PARTS AND LOCK CASE
SPECIFICATIONS
Outer Lock Size: 20(D)x80(W)x400(H)mm
: 65(D)x80(W)x400(H)mm
Operating Temperature: -25° C ~+55° C
Operating Humidity: 25~93% RH, non-coolant
Unlock PIN Code Memory: 100 sets
Unlock Fingerprint Memory: 100 sets
Unlock Card Memory: 100 sets
Supports Mechanical Key unlocking
Supports long-distance unlocking
(optional)
with purchase of online
component
Battery: 1.5VAA (LR6) alkaline batteries X4 (Operating Voltage: 4.5V~6V)
NAME OF PARTS
HOW TO USE
I Switch
Short press to enforce lock / Long press for default setting
I Switch
Volume Control
Choose 3 levels of volume
Volume Control
Emergency Power
Port
Card Reader
Smart Number Pad
Battery Cover
OPERATION
DESCRIPTION
ADD USER
PIN CODE
Add Master
PIN Code
Press S switch, enter initial master PIN code
when prompted by the voice guide (if it has been
changed, enter the changed master PIN code)
and press # followed by 1, 1. Enter the new PIN
code, and press # to confirm. Re-enter the new
PIN code and press # to save.
Add Normal
PIN Code
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 1, 2. Enter user code: 002~090, and
press # . Enter the normal user PIN code, and
press # to confirm. Re-enter the PIN code and
press # to save.
Add One-Time
PIN Code
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 1, 3. Enter user code: 091~0100, and
press # . Enter the One-Time PIN code, and press
# to confirm. Re-enter the One-Time PIN code
and press # to save.
Delete Single
PIN Code
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 1, 4. Enter user code: 002~100 and
press #. Successfully deleted.
Master PIN code cannot be deleted before the
default setting is restored.
Delete All
PIN Code
Press S switch, enter master PIN code when
prompted by the voice guide, and press # followed
by 1, 5, and press #. Successfully deleted.
Master PIN code cannot be deleted before the
default setting is restored.
Add Normal
Key Card
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 2, 1. Enter user code: 101~190 and
press #. Successfully added.
Add One-Time
Key Card
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 2, 2. Enter user code: 191~200 and
press #. Successfully added.
Delete Single
Key Card
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 2, 3. Enter user code: 101~200 and
press # to confirm. Press # again. Successfully
deleted.
Delete All
Key Card
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 2, 4 to confirm. Press # again.
Successfully deleted.
Add Master
Fingerprint
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 3, 1. Enter your fingerprint 3 times.
Successfully added. Re-enter if fail.
Add Normal
Fingerprint
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 3, 2. Enter user code: 202~290 and
press # to confirm. Enter your fingerprint 3 times.
Successfully added. Re-enter if fail.
Add SOS
Fingerprint
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 3, 3. Enter user code: 291~300 and
press # to confirm. Enter your fingerprint 3 times.
Successfully added. Re-enter if fail.
Delete Single
Fingerprint
Press S switch, enter master PIN code when
prompted by the voice guide, and press #
followed by 3, 4. Enter user code: 202~300 and
press # to confirm. Press # again. Successfully
deleted.
Master fingerprint cannot be deleted before the
default setting is restored.
1 2 3
4
7
5 6
8 9
ADD USER
FINGERPRINT
ADD USER
KEY CARD
INITIALISATION AND RESTORE PROGRAM
Initialise User PIN Code:
1234567890
New changed password for 6 digits. “*” key as back. “#” key as confirm.
Master information included master PIN code and master fingerprint.
Restore Default Setting: Long press “I” switch for 5 seconds until you
hear the voice guide.
Include Handle
Speaker
Handle (Exterior)
Mechanical Key
S Switch - Short press for system menu /
Long press for normal mode
Volume Control
I Switch - Short press to
activate lock / Long press
for default settings
Sensor Bolt
Main Bolt
Two-Way
Bolt
Inner Body Handle
Child’s Lock
Emergency Unlock
Knob
Unlock Key (Inside)
S Switch
Short press for system menu / Long press for normal mode
S Switch
Fingerprint Reading Panel (Interior)
• User Manual
• Installation Guide
• Parts Pack
• 2 Card Keys
• 2 Mechanical Keys
Strike Plate
AA Alkaline Batteries
• 1 Smart Lock
Strike Box