Install Lock
Install latch.
Make sure latch angle faces door jamb.
1
OR
Actual Size
Jamb
Angle
Wood Block
(Not Included)
Angle
Prepare keypad.
3
Hands-free Post
Remove sticker from hands-free post.
Adjust hands-free post.
The hands-free post holds the keypad and baseplate together
while installation is completed.
5
Loosen post until it
extends
¹⁄₈
" (3 mm)
to
¹⁄₄
"(6 mm)
beyond door face.
¹⁄₈
" (3 mm) –
¹⁄₄
" (6 mm)
Install baseplate.
6
Snap baseplate onto hands-free post.
The hands-free post will hold the lock
on the door.
Route wire through
opening as shown.
Install strike onto door jamb.
2
Actual Size
Install keypad.
4
IMPORTANT
Wire must slide
under latch.
Bar should slide smoothly through hole in
latch. If not, check door dimensions.
