Schippers 4309606, Operation Manual

Page: 39 / 128

39
12.3 Parameters for BWS in combination with weighing beams and as weighing platform
To set parameters, turn on the scale.
Press key during the self-checking.
Display will show “pn”.
Press , and to enter, display will show “po chk”.
Menu Sub Menu Description
P 0 chk Set H Set high limit for check weighing
Set lo Set low limit for check weighing
beep No No beep for check weighing
Ok Beep, when check weighing within limits
ng Beep, when check weighing outside limits
P1 ref A 2n 0 Automatic zero tracking
Options: 0 .5d ,1 d,, 2 d , 4 d
0auto Zero setting range, after resetting the scale to zero.
Options: 0 , 2 , 5 ,10 , 20 , 50 , 100
0range Manual zero setting range.
Options: 0 , 2 , 5 ,10 , 20 , 50 , 100
0tare Auto zero tracking for NET mode.
(After pressing tare, NET weight will be zero)
Option: on / off
Speed Set the ADC speed
Option: 7.5 / 15 / 3 0 / 60
Zero Set new zero point
P 2 com Mode This option is used to set accumulation and RS-232
communication
Options:
Cont
: Continue data sending
St 1 : Send data once, when stable.
St c : Send data continuously, when stable
P r1 : Send data once, when print key is pressed
(in printer mode)
Pr 2 : Send data to print and accumulation,
when key is pressed
Auto : Auto accumulate and auto print mode.
When weight is stable, return to zero.
Ask : Ask mode,
Command R: read data
Command T: Tare
Command Z: Zero
Wireles : Wireless mode (wireless communication)
Kit 1
:
Baud To set the baud rate.