47
4. Probewiegen
4.1 Erklärung des Probewiegens
Beim Probewiegen ertönt ein Ton/Piepen, wenn das Gewicht auf der Waage den zuvor gespeicherten
Wert erreicht oder überschreitet. Im Speicher werden Ober- und Untergrenze gespeichert.
Testfunktion: Ok:
Beim Probewiegen erscheint folgende Anzeige: OK und der Piepton ertönt, wenn das Gewicht innerhalb
der Grenzen liegt.
Testfunktion: NIO: (Nicht in Ordnung)
Beim Probewiegen wird NIO auf der Anzeige angezeigt und der Piepton ertönt, wenn das Gewicht
außerhalb der Grenzen liegt.
4.2 Einstellen der Grenzen
Drücken Sie gleichzeitig auf
und
, in der Anzeige erscheint „set h“. Mit der
-Taste
wählen Sie „SET H“ oder „SET L“. Drücken Sie zur Bestätigung auf
. Mit den
- und
-
Tasten stellen Sie die Zahlen ein, mit der
-Taste ändern Sie den Wert und mit der
-Taste
löschen Sie den Wert. Nach Eingabe des Werts drücken Sie zur Bestätigung die
-Taste. Drücken
Sie auf
um zurückzukehren.
4.3 Einstellen der Probewiegefunktion
Drücken Sie gleichzeitig auf
und
, es wird „set h“ angezeigt. Mit der
-Taste wählen
Sie Piepton aus, drücken Sie zur Bestätigung auf
. Drücken Sie
, um zwischen OK
(Probewiegen OK), NIO (Probewiegen NIO), Nein (kein Piepton) auszuwählen. Drücken Sie zur
Bestätigung auf
und drücken Sie auf
, um das Menü zu verlassen.
4.4 WICHTIGER HINWEIS!
Probewiegen steht nur bei einem Gewicht über 20 Stk. zur Verfügung.
Um das Probewiegen auszuschalten, geben Sie für beide Grenzen 0 ein, indem Sie auf die
-Taste
drücken, während die derzeitigen Grenzen angezeigt werden. Drücken Sie anschließend auf
, um
die Nullwerte einzugeben.
Summary of Contents for 4309606
Page 2: ...2 ...
Page 33: ...33 Pr 2 Send data to print and accumulation ...
Page 64: ...64 beschädigt ...
Page 128: ...128 ...