Schiller FRED PA-1 Series User Manual Download Page 44

Page: 44 / 60

Maintenance

6.3

Accessories and disposables

Page 44

rt.

no.

: 0-4

8-02

40 Rev. c

FRED PA-1

6.3 Accessories and disposables

Risk to Persons, Equipment Damage — Always use SCHILLER replacement parts
and disposables, or products approved by SCHILLER. Failure to do so may endanger
life and/or invalidate the warranty.

Your local representative stocks all the consumables and accessories for the



FRED PA-1

. A full list of all SCHILLER representatives can be found on the SCHIL-

LER website (

www.schiller.ch

). In case of difficulty, contact SCHILLER. Our staff will

be pleased to help process your order or to provide details for all SCHILLER products.

6.3.1

Order Information

Part No.

Description

1-127-9902

FRED PA-1

semi-automatic

1-127-9901

FRED PA-1

fully automatic

1-127-3780

Multiple-language option

1-127-5180

Wall bracket

1-127-3580

FreeCPR (CPR feedback option)

Devices

Part No.

Description

0-21-0040

1 pair of disposable adhesive defibrillation pads for adults, 80cm²;

pre-connected with RFID

2.155067

1 pair of disposable adhesive defibrillation pads for children, 80cm²;

4-07-0025

Battery pack FRED PA-1

5-35-0043

SD Card

6-39-0140

Set of emergency number stickers for device

6-39-0141

Set of flag stickers for device (for multi language option)

6-39-0148

Set of emergency number stickers for wall bracket

0-48-0240

User Guide, English

Accessories/Disposable

6.3.2

Required accessories

• User Guide
• One pair of adhesive pads
• 1 lithium battery

Summary of Contents for FRED PA-1 Series





























































Search results

Summary of Contents for FRED PA-1 Series

Reviews:

Related manuals for FRED PA-1 Series

Brands by name

Popular brands

Schiller FRED PA-1 Series, User Manual

Search results

Summary of Contents for FRED PA-1 Series

Reviews:

Related manuals for FRED PA-1 Series

Brands by name

Popular brands