Page 21
Initial operation
3
User Guide
Inserting the battery
3.1
A
rt.
no.
: 0-4
8-02
40 Rev. c
FRED PA-1
Remove the protective cap from the battery contacts before inserting the battery
in the device.
<Click>
Insert the battery as indicated in the illustration on the left.
1. Insert the two stop blocks located at the bottom of the battery in the device slots.
2. Perform a rotational movement until the battery locks in place.
3. As soon as the battery is inserted, the
FRED PA-1
®
runs a self-test to check the
condition of the device and the battery.
During the test, the modem LED is on and the electrodes LED is blinking. This test
can last for more than 1 minute.
If this test does not reveal any problems, the green indicator is blinking and all service
status LEDs are off, showing that the device has not detected an error.
Fig. 3.1
Inserting the battery
If the device is used on a patient, this test can be cancelled by opening the cover.
3.1.1
Adding Emergency numbers stickers
If your country’s emergency number differs, apply the sticker with the correct:
