manualshive.com logo in svg

Schiller FRED easy, User Manual

Share
Download
Schiller FRED easy User Manual Download Page 81

 Page 79

Maintenance

7

User Guide

Trouble Shooting

7.5

A

rt.

 no.

: 0-4

8

-00

13 Rev. m

FRED easy

The SD card symbol   is not

displayed, or the symbol 
is displayed.

• No SD card is inserted.

• The card is inserted the wrong 

way.

• The card was inserted with the 

device turned on.

• SD card write-protected.

• Device defective.

Switch the device off and insert the card the right way
around. 

Switch the device off and insert the card the right way
around.

Switch the device off and then on again.

Turn off the device, remove the SD card, unlock the write
protection, and re-insert the card. Then, restart the de-
vice. 

Have the device repaired.

Incorrect date and time
stored on SD card.

• Internal clock error.

• Device defective.

Have the system parameters updated by an authorised
person using the configuration/downloading kit.

Have the device repaired.

Problem

Possible causes

Remedy

Summary of Contents for FRED easy































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands