manualshive.com logo in svg

Schiller FRED easy, User Manual

Share
Download
Schiller FRED easy User Manual Download Page 51

 Page 49

Versions

5

User Guide

SD card version

5.1

A

rt.

 no.

: 0-4

8

-00

13 Rev. m

FRED easy

5.1.1

Inserting the SD card

1. Make sure that the SD card is not write-protected. 
2. Switch off the device before inserting the card. 
3. Insert the card as shown in 

Fig. 5.2 SD card inserted

 (text facing up, in the direc-

tion indicated by the arrow). Otherwise, the device will not recognise the card and
the symbol 

 is displayed.

Fig. 5.1

   Inserting the memory card

4. Once the card is inserted, close the rubber cover of the card slot. 

If the symbol   is not displayed even though the card has been inserted, check that
the card has been recommended by SCHILLER for the use in this type of device.

Inserting the SD card automatically activates the memory function and the symbol 
is displayed (see 

Fig. 5.2 SD card inserted

).

Fig. 5.2

  SD card inserted

The symbol   starts blinking when the SD card is full. No further data is stored; how-
ever, previously recorded data remains stored on the card.

SD cards can be read on a PC using the Schiller data viewing and "

LifeDataNet®

"

software.

DO NOT TOUCH THE PATIENT 

ANALYSING! 

Summary of Contents for FRED easy































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands