Page 45
Defibrillation
4
User Guide
Manual Defibrillation (option)
4.6
A
rt.
no.
: 0-4
8
-00
13 Rev. m
FRED easy
4.6.2
Manual defibrillation procedure
Step 1
Switching on and preparing the device
1. Briefly press the green button (max. 1 second)
to switch on the device.
2. Switch to manual mode by simultaneously pressing the green and orange buttons
+
. Confirm the switching by simultaneously pressing these same buttons
a second time.
3. Connect the electrode cable to the device.
4. Apply the electrodes on the patient's upper body (see
).
Step 2
Charging the energy
5. Briefly press the green button
(max. 1 second).
Patient hazard — Only a physician is allowed to enable manual mode. Observe the
instructions given in section
4.1 Instructions and Safety Notes
.
Patient hazard — Press the green button
only briefly (max. 1 second) to start the
energy charging. If you press the button for too long, the device is switched off.
