4
Defibrillation
4.2
Defibrillation procedure
Page 30
A
rt.
no.
: 0-4
8
-00
13 Rev. m
FRED easy
Open the electrode packaging
and connect the electrodes
Open the electrode packaging and connect the electrodes to the device (unless the
electrodes are pre-connected).
Applying the electrodes
FRED easy®
prompts the user to apply the electrodes on the patient’s chest.
• The yellow indicator is lit and the device repeats the instructions twice until the
electrodes are applied, or until the electrode connector is connected to the device,
respectively, and the electrode-skin resistance (impedance) has reached an ac-
ceptable level.
• After the second prompt to apply the electrodes, the device recommends to per-
form a cardiopulmonary resuscitation cycle. The device will switch off if it has not
detected an acceptable impedance between the two electrodes after 5 minutes of
CPR.
