8
Classic
Pro
ASSEMBLY/SET-UP INSTRUCTIONS
8.
TANK P/N 4165561
: Connect the fuel line F1
from the engine fuel line to the pick-up fitting on the
back of the tank. Connect the purge fuel line, F2,
fromthe purge port on the engine to the vent at the
top of the tank as shown in Figure 1.
TANK P/N 4163068-1:
Connect the fuel line N from
fuel tank to the furl filter line and secure with the
supplied hose clamp as shown in Figure 2.
TANK P/N IS LOCATED ON BOTTOM OF TANK.
9. Route cables and wires as shown, and tie
harness to upper handles as shown.
FIGURE 1
FIGURE 2
Summary of Contents for Bob-Cat CLASSIC PRO 932007G
