5
Classic
Pro
NOTE: FRONT, REAR, RIGHT HAND AND LEFT HAND REFERENCES BELOW ARE
WITH RESPECT TO AN OPERATOR AT THE CONTROLS.
ASSEMBLY/SET-UP INSTRUCTIONS
1.
UNCRATE - Discard the sides and top of the crate. Remove the loose parts from
the crate. Discard the rest of the packing material.
2.
Remove all tie wraps and banding.
Remove traction control rods
D
, gear shift
lever
A
and parts bag
B
. Set aside for later
use. Remove fuel tank from the crate.
3. Install upper handle
B
to lower handle
D
using
(2) 3/8-16 X 1" bolts and (2) 3/8-16 nylon lock
nuts through upper holes
F
and also installing (2)
3/8-16 X 1" bolts and (2) 3/8-16 lnylon lock nuts
through holes
E
in the upper handle and one
of the three holes available to give the desired
handle height.
Summary of Contents for Bob-Cat CLASSIC PRO 932007G
