9
Classic
Pro
10. Attach traction control rods
D
by inserting the
swivel
P
through the upper hole in the bellcranks
Q
and the other end of the traction control rods through
the traction control lever
S
on the handlebar. Secure
with washers and hairpins, with the washers to the
inside.
11. To adjust traction control rods, remove the
traction control rod swivel
P
and the brake rod
R
from the bellcrank
Q
and adjust swivel up or down
the control rod so that once reinstalled there is a 1/4
"
(6.35mm) gap between the bottom of the rod and
the bottom of the traction lock with the traction lock
pushed down in the drive position, shown below.
ASSEMBLY/SET-UP INSTRUCTIONS
Summary of Contents for Bob-Cat CLASSIC PRO 932007G
