automatic cable rewinder FT 038 e-mobility with integrated charging electronic
installation and operating instruction
installation
and operation instruction FT 038 e-mobility miL - A4 -
version B
Seite 7
11.03.2021
Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach
FT 038.0516.I03 / FT 038.1032.I03
Switch ON / OFF:
Switches the integrated charging electronics on or off. The charging electronics must be
switched off after each charging process.
Signal lamp STATUS CONTROL (LED yellow)
Different flashing frequencies of the indicator light is shown the status of the charging
controller.
flashing
frequency
meaning
1x fast + pause
No vehicle detected - standby
2x fast + pause
Vehicle detected
1x long + pause
Vehicle requests charging (contactor is ON)
20x fast in 0,5 sec
The current setting mode is called up or exited
1x each 0,3 sec
Current setting mode
– one more amper set
error states (no charging)
3x fast + pause
controller is disabled in software (FW >= 6)
4x fast + pause
charging with ventilation is disabled (FW >= 13)
5x fast + pause
Pilot signal check failed (FW >= 11)
6x fast + pause
Residual current check failure (FW >= 16)
Signal lamp LOAD ACTIVE (lamp green):
Contactor is switched (loading vehicle)
