
automatic cable rewinder FT 038 e-mobility with integrated charging electronic
installation and operating instruction
installation
and operation instruction FT 038 e-mobility miL - A4 -
version B
Seite 3
11.03.2021
Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach
SPRING LOAD
The spring load is set at the factory. It may become necessary to adjust this setting. Before
doing so, the locking device should be engaged. Then remove the cable stopper and draw
the cable out of the roller guide. The load can be increased by additional windings of the
cable anti clockwise and decreased by unwinding the cable in clockwise direction (rewind).
Once this has been completed, it is very important that the cable is fed back through the
roller guide and secured with the cable stopper. Increasing the spring load reduces the
extractable cable length. A reduction of the spring load may affect the rewind function of
the reel.
ATTENTION
Do not release the cable when rewinding, the tension of the spring can accelerate
the winding speed to such a degree that the swinging cable end could cause injury.
Also damage to the cable and spring could be the result of such an action.
CABLE STOPPER
The length of the available cable can
be individually adjusted with the
provided cable stopper. The reliable
clamping adapts to various cable
diameters between 6 and 16 mm. For
a thicker cable, a larger version is
available. The stopper also serves as
a safeguard against a full unload of the
spring if the cable is unintentional
released. It should therefore never be
removed.
ROLLER GUIDE
Fitted with four rollers, the roller guide ensures that
the cable is correctly guided. It can be operated in a
fixed or flexible mode. The roller guide adjusts then to
the direction of the pull. The guide ensures that the
cable is always guided onto the reel and prevents it
from sliding of the drum.