schildknecht DATAEAGLE X-TREME 3 Series, Installation And Commissioning Manual

Page: 5 / 110

Installation and commissioning DATAEAGLE 3XXX X-treme
5.3.3. Install new module 5-21
5.3.4. Start Dataeagle Wizard 5-22
5.3.5. Procedure for exchanging radio modules 5-23
5.3.6. Example 1: Exchange of a Radio Slave 5-24
5.3.7. Example 2: Exchange of a Radio Master 5-31
5.4. Profibus-Slave-Addresses 5-47
5.4.1. Procedure for exchanging a Radio Master before de-installation 5-48
5.4.2. Profibus-Slave-Address at system extension 5-53
5.4.3. Profibus-Slave-Address when Radio Master is exchanged 5-55
6. Increasing the system availability 6-57
6.1. Function 6-57
6.2. Setting of the filter time 6-57
6.3. Typical values for the filter time 6-61
6.3.1. Default 6-61
6.3.2. Recommendation for operation 6-61
6.3.3. Recommendation for commissioning 6-61
6.3.4. Recommendation for applications with Profisafe 6-61
7. Working with the diagnostic slave 7-1
7.1. General information 7-1
7.2. Mode of operation 7-2
7.3. Integrate the diagnostic slave into a Profibus network 7-3
7.3.1. Integrate GSD file of diagnostic slave in Step 7 7-3
7.3.2. Data exchange between PLC program and diagnostic slave 7-10
7.3.3. Data structure 7-11
7.4. Examples of applications 7-18
8. Dismantling and disposal 8-1
9. Tips and Tricks 9-1
9.1. Improving the EMC safety 9-1
9.1.1. Introduction 9-1
9.1.2. Basic guidelines 9-1
9.2. Guidelines for optimized installation of antennas 9-5
9.3. Advices for troubleshooting 9-7
10. Technical specifications 10-2