schildknecht DATAEAGLE X-TREME 3 Series, Installation And Commissioning Manual

Page: 4 / 110

Installation and commissioning DATAEAGLE 3XXX X-treme
Table of contents
Page
Introduction 1-1
1. General information 1-1
1.1. Guide to symbols 1-1
1.2. Copyright and brand names 1-1
1.3. Declaration of conformity and EC directives 1-1
2. Safety instructions 2-2
2.1. Intended use 2-2
2.2. General information 2-2
2.3. Installations instructions 2-3
2.4. Safety instructions for operation 2-3
2.5. Personnel qualification 2-4
3. Structure 3-1
3.1. System description 3-1
3.2. Radio module 3-2
4. Installation of new devices 4-1
4.1. Overview Installation 4-1
4.2. Install radio module 4-2
4.3. Install antenna cable 4-3
4.4. Connect PROFIBUS plug 4-4
4.5. Connect power supply 4-4
5. Extension and exchange 5-1
5.1. Preparation 5-1
5.1.1. System requirements 5-1
5.1.2. Create a new folder 5-1
5.1.3. Microsoft Internet Explorer 5-2
5.1.4. Install USB drivers 5-3
5.1.5. Install Dataeagle Wizard 5-7
5.2. Extension 5-9
5.2.1. Additional Profibus Slave to existing or new Radio Slave 5-9
5.2.2. Additional Radio Slave 5-9
5.2.3. Start Dataeagle Wizard 5-11
5.2.4. Configure Radio Master 5-12
5.2.5. Configure Radio Slave 5-17
5.3. Exchange 5-20
5.3.1. Remove wiring 5-21
5.3.2. Remove old module 5-21