Installation and commissioning DATAEAGLE 3XXX X-treme
Chapter 5
– Extension and exchange
5.4.3. Profibus-Slave-Address when Radio Master is ex-
changed
Proceed with the following steps when the Radio Master has
been exchanged:
Double-
click on the „Interface“, then once on „DP Pa-
rameter“.
The factory setting is shown:
Before de-installation of the Radio Master you have checked
if Profibus-Slave-Addresses have been assigned or if they
are detected automatically.
If they are detected automatically no further steps are re-
quired here. Continue with the configuration of the Radio
Master.
If Profibus-Slave-Addresses have been assigned in the old
Radio Master you must now enter these addresses in the
new Radio Master.
No
address
assigned
