manualshive.com logo in svg

Schiedel TecnoFlex Plus, Installation Instructions Manual

Share
Download
Schiedel TecnoFlex Plus Installation Instructions Manual Download Page 13

13

Tecnoflex Plus Accessories

TOP PLATE

The top plate is used in combination with the top clamp to 
support the weight of the liner at the top of the stack. (see 
Fig.5 opposite)The top plate should be fixed securely in place 
and flaunched to make weather proof 

TOP INSERT

A top insert should be used to protect the top of the flex 
inside the chimney pot (see Fig.5 opposite). The area between 
the flex and the chimney pot should be sealed to prevent 
water ingress.

ADAPTOR TECNOFLEX PLUS TO PRIMA PLUS

The adaptor from TecnoFlex Plus can be used as an alternative 
to the top insert, or to connect from TecnoFlex Plus to Prima 
Plus product within the chimney stack. It is secured to the flex 
as shown in Fig.1 opposite. The area between the adaptor and 
the chimney pot should be sealed to prevent water ingress.

Adaptor TecnoFlex Plus

to Prima Plus

Top Insert

Top Plate

Summary of Contents for TecnoFlex Plus





























Reviews:

No comments

Brands by name

Popular brands

Load more brands