CDR Wireless Installation
B1051302 Rev. B
27
Table 4. Attaching the Antenna / Receiver Mounting Adapter
Step Instruction
Illustration
1.
Locate the standing pegs on the
inside of the Mounting Adapter
and the retaining guides that
extend slightly past the edge of the
Adapter.
2.
Line up the Adapter pegs with the
mounting holes on the base of the
Antenna / Receiver.
3.
Snap the Mounting Adapter to the
Antenna / Receiver base, making
sure that the 2 guides on the
Mounting Adapter slip over and
hold the Adapter to the base.
Retaining
Guides
Standing
Pegs
