Schick CDR Wireless, Installation Manual

Page: 26 / 36

22 B1051302 Rev. B CDR Wireless Installation
6. Base Station Positioning
Please Note: The side of the Antenna indicated by the symbol shown in Figure 5
identifies the active side of the Antenna. This side must face the patient.
Figure 5. Symbol designating active side of Antenna
The USB Interface and Antenna / Receiver can be surface-, wall-, or ceiling-mounted as
one unit (docked) or separately (undocked) to achieve the best performance.
6.1. Mounting Options in the Docked Configuration
To position the USB Interface and the Antenna / Receiver in their shipped (docked)
arrangement, refer to
Section 6.2.1 .
6.2. Mounting Options in the Remote Confirguration
To release the USB Interface and the Antenna / Receiver from their docked arrangement
and to position them remotely, refer to
Section 6.2.2 .
6.2.1. Docked Mounting Option
1. Choose a convenient location for the USB Interface and the Antenna / Receiver,
keeping in mind that:
a. You may need to periodically access the Sensor cradle for channel
configuration.
b. The Antenna / Receiver must face the front of the patient and be within 6
feet (1.8 meters) of the area where the Wireless Sensor will be used ( Figure
6 ).
2. Using the USB cable provided with your system, connect the cable from the USB
Interface to the PC workstation. If you need a different USB cable from the one
supplied with your system, refer to the CDR Wireless User Guide for compatible
cable lengths and markings.