www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 29
• Avoid accidental starts: do not press the start but-
ton while inserting the plug into the socket.
• Damage to hearing if no suitable ear protection is
applied.
• Dirt particles, dust etc. can get irritate the eyes or
face despite wearing safety goggles.
• Inhaling swirled up particles.
Keep this safety information in a safe place.
6. Technical Data
Mains connection
230 V~ / 50 Hz
Motor rating
1100 W
Operating mode
S1
Compressor speed
3400 min
-1
Pressure vessel capacity
24 l
Operating pressure
approx. 8 bar
Theoretical intake capacity
approx. 180 l/min
Theoretical delivery rate
approx. 120 l/min
Protection type
IP20
Weight of the unit
ca. 13 kg
Max. altitude
(above mean sea level)
1000 m
The noise emission values were measured in accord-
ance with EN ISO 3744.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
m
Warning:
Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Sound power level L
wA
97 dB(A)
Sound pressure level L
pA
75,4 dB(A)
Uncertainty K
wA/pA
1,91 dB(A)
7. Before starting the equipment
• Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
• Check the equipment for damage which may have
occurred in transit. Report any damage immedi-
ately to the transport company which was used to
deliver the compressor.
• Install the compressor near the point of consump-
tion.
• Avoid long air lines and supply lines (extension ca-
bles).
• Make sure that the intake air is dry and dustfree.
• The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of
suitable clothing and masks.
• Do not smoke during the spraying process and/or
in the work area. Risk of explosion! Paint vapours
are easily combustible.
• Never set up or operate the equipment in the vicin-
ity of a fire place, open lights or sparking machines.
• Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
•
The work area must exceed 30 m³ and suffi cient
ventilation must be ensured during spraying and
drying.
• Do not spray against the wind. Always adhere to
the regulations of the local police authority when
spraying combustible or hazardous materials.
• Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres-
sure hose. These media will destroy the pressure
hose.
• The work area must be separated from the com-
pressor so that it cannot come into direct contact
with the working medium.
Operating pressure vessels
• You must keep your pressure vessel in good work-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re-
pair work immediately and meet the relevant safety
precautions.
• The supervisory authority may enforce essential
control measures in individual cases.
• A pressure vessel is not allowed to be used if it has
faults or deficiencies that can endanger workers or
third parties.
• Check the pressure vessel for signs of rust and
damage each time before using. Do not use the
compressor with a damaged or rusty pressure ves-
sel. If you discover any damage, then please con-
tact the customer service workshop.
Remaining hazards
Remain attentive at all times when working, and keep
third parties at a safe distance from your work area.
Even if you use this electric power tool in accord-
ance to instructions, certain residual risks cannot be
eliminated. Remaining hazards can be minimized by
following the instructions in „Safety instructions“, „In-
tended Use“ and in the entire operating manual.
The following hazards may arise in connection with
the equipment’s construction and layout:
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
