10 english
distance from the work area.
not used should be kept in a dry place, inaccessible for
children.
the rate for which it was designed.
do a job for which is was not designed.
cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current
your product will draw. An undersized cord will cause a
drop in voltage resulting in loss of power and overheat-
ing.
neckties, rings, bracelets, or other jewelry which may
-
mended. Wear protective hair covering to contain long
offer only little protection. They are no safety glasses.
Wear a face or dust mask when working in a dusty envi-
ronment.
practical. It is safer than using your hand, and it frees
both hands to operate the tool.
times.
best and safest performance. Follow the instructions for
lubricating, and changing accessories.
when changing accessories, such as blades, bits, cut-
ters, and the like.
-
ing instructions for the recommended accessories. The
use of improper accessories may cause risk of injury to
persons.
if the machine is tipped or if the cutting tool is uninten-
tionally contacted.
a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and
binding of moving parts, breakage of parts, mounting,
and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly
repaired or replaced.
-
blade or cutter only in the moving direction of the tool.
Wait until the tool has come to an absolute standstill,
before you leave the machine.
plug from the socket by pulling the extension cord.
of a second is sufficient to cause an injury.
common sense and staying alert as long as the machine
is switched on.
Additional safety rules for the belt and disc sanding machine
WARNING:
Do not use your machine until it is completely
assembled and installed according to the instructions.
machine, ask the head of the department, your teacher,
or any other qualified person.
ATTENTION:
This machine has only been designed for
sanding wood or similar materials. The sanding of other
materials can cause fire, injuries, or damage the prod-
uct.
IMPORTANT:
Mount and use the machine on a horizontal
surface. A non-horizontal surface can damage the mo-
tor.
sanding long and heavy panels), it must be fastened to a
solid surface of sufficient carrying force.
– see arrows at the back of the belt.
cannot come off the drive pulleys.
in horizontal position.
the sanding disc.
disc running downwards, in order to maintain the work-
side of the sanding disc, the workpiece could be ejected
and cause injury to persons.
less between the table or fence and the sanding belt or
disc.
cloth during sanding.
with the wood.
cause your hand to touch the sanding belt or disc.
-
ditional support at table height.
-
piece with the table or the fence. Exceptions are the
sanding of curved workpieces on the outside of the sand-
ing disc.
other objects, before turning the machine on.
the table while the sanding machine is in operation.
socket when fitting or removing accessories.
while the tool is running, or as long as it has not come to
an absolute standstill.
Proper Use
The machine meets the currently valid EU machine directive.
instructions as well as the technical data given in the
calibrations and dimensions must be adhered to.
-
erally recognized safety and technical rules must also be
adhered to.
Summary of Contents for 490 3302 924
Page 83: ...international 81 ...
Page 84: ... ...
