www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
38 | GB
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domes-
tic waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and elec-
tronic equipment (WEEE). This product must be dis-
posed of at a designated collection point. This can
occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling of
waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly
disposing of this product, you are also contributing to
the effective use of natural resources. You can obtain
information on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal
of waste electrical and electronic equipment or your
waste disposal company.
17. Troubleshooting
Fault
Possible causes
Action
Blade dissolves after
switching off the
engine
To slightly tightened fastening nut
Tighten the right hand thread nut
Engine will not start
Failure mains fuse
Check mains fuse
Defective extension cable
Replace extension cord
Connections on motor or switch not in
order
Repair by electrical specialist
Motor or switch faulty
Repair by electrical specialist
Motor will not work,
the fuse is active
Cross section of the extension cable is not
sufficient
See „Electrical connection“
Overload by a blunt saw blade
Change saw blade
Fire marks on the
cutting surface
Blunt saw blade
Have saw blade sharpened (only by an
authorised sharpening specialist) or change it
Wrong saw blade
Change saw blade
