3
– PRODUCT PRESENTATION
COD:
500M380.D.2018
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
12
Weight (including pumps):
195 Kg
Hydraulic Connection
Seawater inlet:
1’’ fitting, 30mm internal diameter reinforced hose.
Exhaust:
¾’’ fitting, 25mm internal diameter reinforced hose.
Fresh water:
3/8’’ fitting, 10x12mm hose.
Pumps:
Pre-pump type: Centrifugal multistage pump
Feed pump type: Centrifugal multistage pump
Pressure amplifier type: Carbon fibre pressure amplifier
Prefilter unit:
n. 1 Pleated big blue filter 20 microns 4-1/2" x 20" (59 mm x 508 mm)
n. 1 Pleated big blue filter 5 microns 4-1/2" x 20" (59 mm x 508 mm)
n. 1 Active carbon filter Big Blue 4-1/2" x 9-3/4"
Power supply:
380 Vac, 50 Hz three phase
Average electric consumption
: 3,5 kWatt/h average
Nominal fresh water production:
500 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
Fresh water quality:
Under 500 ppm TDS average
CEE conformity
:
In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.6 Features of the product
The water produced by a Schenker plant, produced from clean seawater has a purity of between 350 & 450
parts per million Totally dissolved solids (TDS/PPM), but the potability may not be guaranteed as bacterium
may be present in the watermaker, caused by non-observance of shutdown and cleaning procedures. It is
essential that correct shut down and storage procedures are followed to ensure continued purity of the product
water. UV treatment of the product water may be beneficial.
