SDS 9414i HPLC Pump
Version: 2.2 (July 2007)
Page: 36 / 45
9.4 SOFTWARE INITIALIZATION
§
Turn off the main switch
§
push the [
STOP
] key and turn the main switch on again. Keep the [
STOP
] key pressed
until the display indicates that the power is on again. The display shows:
§
Normally, keep the Network Address at “
1
”. The Network Address is used for the
identification of a pump when using RS232 serial control. See below for further
information on Serial Control.
§
Press the [
PROG
] key again. The following is displayed:
§
Please refer to
7.3 POWER DOWN FEATURE
for further information.
§
Press the [
PROG
] key again. The following is displayed:
§
This display shows the installed Firmware version.
§
IMPORTANT:
With the
PURGE
function ([
p
] and [
q
] keys) you can enter the
Instrument Configuration Menu
.
9.4.1 INSTRUMENT CONFIGURATION MENU
§
The
Instrument Configuration Menu
can by entered from the version
Info Dialog
by
pressing the ([
p
] and [
q
] keys together. The following is displayed:
Summary of Contents for SDS 9414I
Page 1: ...SDS 9414I HPLC Pump...