The product complies with the following standards and
directives:
2014/30/EU
EMC Directive
DIN EN 61326-1:2013
Electrical equipment for measurement, control and
laboratory use – EMC requirements
Part 1: General requirements
CE-Conformity
Instruction Manual
SK6288VKOC-4L
shar
ed_CE-Conformity_W
arranty_ML.indd
37
Instruction Manual SK6288VKOC-4L © 2018-04 E
Copyright ©
Unless explicitly allowed, distribution, sale or use of this document or its contents, for purposes other than
those intended, is forbidden. Repeated transgressions will lead to prosecution and demands for compensation.
All rights of patent protection and registration or copyright of a product or its design lie with Schäfter+Kirchhoff.
Schäfter+Kirchhoff GmbH and the Schäfter+Kirchhoff logo are registered trademarks.
We reserve the right to improve or change specifications so that the system description and depictions in the
Instruction Manual may differ in detail from the system actually supplied. The Instruction Manual is not covered
by an update service.
Date of document publication: 17.04.2018
Schäfter+Kirchhoff GmbH
Tel.: +49 40 853 997-0
Kieler Straße 212
Fax: +49 40 853 997-10
22525 Hamburg
Email: [email protected]
Germany Internet:
www.SuKHamburg.com
This manual has been prepared and reviewed as carefully
as possible but no warranty is given or implied for any
errors of fact or in interpretation that may arise. If an error
is suspected then the reader is kindly requested to inform
us for appropriate action.
The circuits, descriptions and tables may be subject to
and are not meant to infringe upon the rights of a third
party and are provided for informational purposes only.
The technical descriptions are general in nature and
apply only to an assembly group. A particular feature
set, as well as its suitability for a particular purpose, is
not guaranteed.
Each product is subjected to a quality control process.
If a failure should occur then please contact the supplier
or
Schäfter + Kirchhoff GmbH
immediately. The warranty
period covers the 24 months from the delivery date. After
the warranty has expired, the manufacturer guarantees
an additional 6 months warranty for all repaired or substi-
tuted product components. Warranty does not apply to
any damage resulting from misuse, inappropriate modifi-
cation or neglect. The warranty also expires if the product
is opened. The manufacturer is not liable for consequential
damage. If a failure occurs during the warranty period
then the product will be replaced, calibrated or repaired
without further charge. Freight costs must be paid by the
sender. The manufacturer reserves the right to exchange
components of the product instead of making a repair.
If the failure results from misuse or neglect then the user
must pay for the repair. A cost estimate can be provided
beforehand.
Warranty