Camera Control and Performing a Scan
Instruction ManualGebrauchsanleitung SK6288VKOC-4L
shar
ed_CameraContr
ol(3d)_Device-Featur
e-List_GigEV
.indd
24
Instruction ManualGebrauchsanleitung SK6288VKOC-4L © 2018-04 ED
Camera Contr
ol and Performing a Scan
3.3 GigE Vision Device Feature List (Gen<i>Cam compliant)
a) Device Information
Display of device information, not editable.
Data in this dialog are editable, if they are not
greyed out. Some data can only be edited as long
as acquisition is stopped.
!
b) Image Size Control
SensorWidth:
number of pixels in line sensor (fixed)
SensorHeight:
1 (fixed)
Width:
image width = SensorWidth (fixed)
Height:
image height (number of lines per image)
1
for Line Scanning
≥
2
for Area Scanning,
limited by 32 MByte buffer size
PixelFormat:
Mono8 = gray scale 8-bit
Mono10 = gray scale 10-bit
Mono12 = gray scale 12-bit
PixelSize:
bits per pixel, depends on PixelFormat
Mono8: PixelSize = Bpp8 = 8-bit
Mono10: PixelSize = Bpp16 = 16-bit
Mono12: PixelSize = Bpp16 = 16-bit
c) Acquisition And Trigger Controls
AcquisitionMode:
Continuous: repetitive acquisition
SingleFrame: one snapshot
AcquisitionLineRateAbs:
line rate in Hz
minimum:
50 Hz
maximum:
9260 Hz
Trigger Selector:
for line synchronization
FreeRun:
each line is acquired, no trigger
LineStart:
external trigger, reading in next line
ExposureStart: external trigger and restart exposure
ExposureActive: exposure time is determined by the
external trigger period
ExposureTimeRaw:
exposure time in µs, 10 ... 20000
(master feature of exposure control)
ExposureTimeAbs:
exposure time in ms, 0.01 ... 20
d) Analog Controls (Gain / Offset)
GainSelector:
gain control for all taps
or for each tap separately
GainRaw:
gain adjustment
range:
0 ... 1023, typical 70 (integer)
(master feature of gain control)
GainAbs:
gain adjustment in dB
range:
0 ... 24.0 (float)
BlackLevelSelector:
offset control for for all taps
or for each tap separately
BlackLevelRaw:
offset adjustment
range:
0 ... 255 (integer)
3x 2096
3x 2096
SK6288VKOC-4L
See
Synchronization Modes (p. 21)
See
Gain/Offset Adjustment (p. 15)