Operation
4 OPERATION
4.1 Introduction
This chapter describes the basic functions of the espresso machine. Read them care-
fully to ensure easy and problem-free routine operation.
Note:
Proper installation and programming of the espresso machine by an authorized ser-
vice technician are crucial for a smooth operation and good product quality
Danger!
•
During product release, never move cups or other objects positioned below
the beverage outlet, the hot water outlet or the steam pipe! The beverages
delivered by the machine are hot! After having pressed the selection button,
keep hands and other body parts away from the outlets to prevent scalding!
•
Never aim steam or hot water jets against persons!
•
Do not touch the hot cup plate or the beverage outlets. Touch the hot water
outlet and the steam pipe only at the insulated handles.
•
The espresso machine does not stop when a cup is removed during delivery
from underneath an outlet.
Danger!
Switch off the espresso machine if you accidentally pour liquid over the cup
plate (risk of short-circuit)!
Contact customer service representative immediately.
Noise emissions!
Noise emission levels can be up to 70 dB (A), particularly when heating up beverages.
4.2 Operating
Modes
Your espresso machine is ready for operation. When a product button is pressed, the
selected beverage is delivered.
The control board is switched off. The espresso machine is, however, still connected
to the power supply.
Note:
When switched on again, the machine will need a short time to reach the programmed
operating temperature.
select beverage
12:00 01.05.2003
<< Standby >>
12:00 01.05.2003
Page 4-2
BASO-1 SUSA - 02.04 - V02
