Operation
4.5.2
Extended idle time of more than 4 weeks:
1.
Complete steps 1 to 5 as described in "Several weeks".
2.
The boilers must be fully drained for hygienic reasons
. To empty the boil-
ers, ask a customer service authorized by the manufacturer for assistance.
Attention!
If you resume operation at later point in time, ensure that you open the water supply
first and only then switch on the power supply.
4.5.3
Disassembly of the espresso machine
Contact a customer service authorized by the manufacturer.
4.6
Chip card functions
Important!
Chip cards should be handled with the same care as bank cards (do not bend, do not
use as “door openers”, etc.)
Note:
For all the functions described in this chapter, it is assumed that the espresso ma-
chine is ready for routine operation in normal operating mode
4.6.1
Chip card "CUP"
Note:
The "CUP" chip card queries and adds up each individual product counter - no reset
function.
1.
Insert the CUP chip card into the card reader.
The following message is displayed:
Last read out
date 01.05.2003
Display example
2. Press
the
[
RESET
]
button.
The following message is displayed:
total espresso
512
total tee
52
Display example
3.
Press the desired product button(s).
The following message is displayed:
product total
512
Display example
4.
Remove the CUP chip card from the card reader.
The following message is displayed:
Select beverage
12:00 01.05.2003
Display example
BASO-1 SUSA - 02.04 - V02
Page 4-7
