Scell-it E-649RP, Operation Manual

Page: 2 / 40

EN
FR
PL
CZ
IT
E-649RP / User manual
2
TOOL CAPACITY
Blind structural rivets Monobolts or equivalent dome head 4.8mm
Nosepiece K/3.1 art. code P09011-00
Blind structural rivets Monobolts or equivalent dome head 6.4mm
Nosepiece M/4.2 art. code P09013-00
Blind structural rivets Interlok or equivalent dome head 4.8 mm
Nosepiece J/3.2 art. code P09010-00
Blind structural rivets Interlok or equivalent dome head 6.4mm
Nosepiece L/4.5 art. code P09012-00
Blind structural rivets Monobolts / Interlok or equivalent countersunk head or
standard blind rivets 4.8mm – nosepiece P/3.3 art. code P03147-00
Blind structural rivets Monobolts / Interlok or equivalent countersunk head or
standard blind rivets 6.4mm – nosepiece L/4.3 art. code P03146-00
TOOL
SPECIFICATIONS
Air supply pressure:
0.5Mpa ~ 0.7Mpa
Output traction power:
14,225 N ~ 19,915 N
Stroke: 26 mm
Net weight: 1.80 kgs
GENERAL SAFETY INSTRUCTIONS AND PRINCIPLES
• This tool should be used exclusively
to apply blind rivet prescribed as
TOOL CAPACITY . It can’t be used
for other purposes, such as hammer,
etc…
• This tool must be used with treated
compressed air supply in a pressure
range 0.5MPa-0.7MPa.
• The tool must be, during any
kind of maintenance or repair,
DISCONNECTED from the source of
compressed air..
• DO NOT use the tool when you are
tired or under the influence of drugs,
alcohol or medication. One moment
of inattention when working with the
tool can result in serious injuries.
• DO NOT use the tool in the
environment described as below:
- fuel and combustion air.
- temperature rapidly rising.
- humidity, rain, water, storm and
thundering.
The tool is not designed for explosive
environment.
• When the tool is suspended by the
operation hook during use, be sure
the tool will not fall.
• When using the tool, always
carry safety shoes, protective
goggles, protective gloves, safety
helmet, ear protectors and other
necessary protections. It is highly
recommended for safety reason.
• Remove the setting tools or
wrenches before switching on the
pneumatic tool. A wrench connected
to a rotating part of the tool can
result in injuries.
• Do not allow persons who have not
read these instructions or who are
not familiar with the tool to use it.
• Keep children and other persons
away when you are working with
the tool. If distracted, you may lose
control over the tool.
• Have your tool repaired only by
qualified specialist personnel and
only with original spare parts. If in
doubt, always return the tool to the
distributor.
• Any alterations of the tool, its
accessories or spare parts remain in
sole responsability of the customer.
• The tool must be kept in top
condition and regularly tested for
damage and proper operation. Check
that moving parts function correctly
and do not jam and that parts are
not broken or damaged in such a
way that the function of the tool
is impaired. Have damaged parts
repaired before using the tool.
• Never aim with the tool at another
person.
• Oxygen or other flammable gasses
from pressure cylinders must not
serve as a driving agent.
• Avoid unnecessary contact with the
hydraulic fluid to prevent possible
allergy reaction of the skin.
• After the service life, discard the tool
according to the applicable disposal.
• The pressure regulator has to be
equipped with a filter to avoid
impurities and water.
READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL !
It is IMPORTANT to follow the safety instructions for adequate
protection against injuries.
ENGLISH