Scarlett SC-GS135S09, Instruction Manual

Page: 5 / 32

IM022
www.scarlett.ru SC-GS135S09 5

ATTENTION! Pour water into water tank only when the device
is switched off from electric mains.

ATTENTION! To avoid scalding please always unplug the
garment steamer before attaching or detaching the fabric
brush and allow it to cool completely.

ATTENTION! The garment steamer generates high
temperatures of steam. Do not touch the steam head, make
sure the steamer is facing away from you in an upright
position.

ATTENTION! When using the garment steamer, make sure
the steamer head is facing away from you and in an upright
position.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design
without prior notice, unless such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
PREPARATIONS

Press the water tank release button, pull out the water tank, open the water inlet cover and fill
tap water into the water tank until it reaches the maximum level. Put back the water tank.

ATTENTION! Pour water into water tank only when the device is switched off from electric
mains.

Hold the appliance with your hand positioned safely at the neck of the garment steamer in an
upright position, use your other hand to attach the fabric brush onto the steam head. the fabric
brush can be attached either way and will lock into position with an audible ”click”.

ATTENTION! To avoid scalding please always unplug the garment steamer before attaching
or detaching the fabric brush and allow it to cool completely.

Connect the device to the mains, press the power button and the light of this button will flash
.

When the light stops flashing, you can start steaming.

The steamer has three steam supply modes . Select the desired mode
depending on the degree of crease or type of fabric.

To set the desired steaming mode, press the control button the appropriate number of times: 1
-on and light steam; 2 - medium steam, 3 times-powerful steam.
STEAMING

The garment steamer is easy to use and is perfect for removing wrinkles/creases from
garments and curtains as well as refreshing furnishing fabrics.

It can be used on most fabrics according to the fabric label.

The garment steamer cab be easily used when the fabric is hanging.

Put the garments onto the hanger, slightly stretch the fabric and check that there is nothing
under the fabric which can be damaged by the steam

NOTE: we recommend you do not steam over metal accessories.

Keep a distance of at least 5cm between the steam head and the garment and move your
arm up and down motion

You will feel vibrations and hear a subtle humming sound while steaming; this is normal

WARNING: the garment steamer generates high temperatures of steam. Do not touch the
steam head, make sure the steamer is facing away from you in an upright position.