Scarlett SC-296, Instruction Manual

Page: 5 / 49

IM001
www.scarlett.ru SC-296 5
RADIO INTERFERENCE
·
Operation of the microwave oven can cause interference to your radio, TV or similar equipment.
·
When there is interference, it may be reduced or eliminated by taking the following measures:
Clean door and sealing surface of the oven;
Move the microwave oven away from the receiver;
Reorient the receiving antenna of radio or television.
Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits.
INSTALLATION
·
Make sure that all the packing materials are removed from the unit.
·
Check the oven for any damage in transit:
Misaligned or bent door and sealing;
Housing and door window;
Inside surfaces.
·
If any damage occurs while using, switch off and unplug the oven and contact qualified service personnel.
·
Place the microwave oven on a flat, stable surface, able to hold its weight with a food to be cooked in the oven.
·
Do not place the oven where heat, moisture or high humidity are generated, or near flammable materials.
·
Do not place anything on the oven. Do not block any openings on the appliance.
·
For correct operation, the oven must have sufficient airflow. Allow 20 cm free space above the oven, 10 cm back and 5 cm from both sides.
MICROWAVE COOKING METHODS
·
Arrange food carefully. Place thickest areas towards outside of dish.
·
Watch cooking time. Cook for the shortest amount of time indicated and add more if needed. Food severely overcooked can smoke or ignite.
·
Cover foods while cooking. Cover prevents spattering and helps to cook food evenly.
·
Rearrange food such as meatballs halfway through cooking both from the top to the bottom and the center of the dish to the outside.
·
Round/oval dishes rather than square/oblong ones are recommended, as food in corners tends to overcook.
OPERATION
·
Plug oven to main.
COOKING INTERRUPTION
·
This feature is useful for checking a food cooking degree.
·
Cooking will be stopped while the door is opened. With the closed door treatment will continue.
MILTIFUNCTION KNOB
·
Use to set current clock, time, and treatment mode.
·
The oven light and cooling fan will come on while the timer is operating and button is pressed.
·
After a set time is over, display will show End , and beeps will sound every 3 minutes until the oven door will opened or any button will pressed.
·
To interrupt operating press button.
CURRENT TIME SETTING
·
The LED display will flash « 88:88 » when plugged in power supply and after 3 seconds change to «-:-» flash, prompting you to set current clock.
·
The oven clock is of 24h size.
·
Press button.
·
Set current hours by turning the multifunction knob (clockwise to increase and vice versa).
·
Press button once more.
·
Set current minutes by turning the multifunction knob.
·
Press button to confirm settings.
POWER LEWELS
·
Guiding by a Table set a power level, pressing button. With each subsequent button pressing display will show power level:
100 ž 80 ž 60 ž 40 ž 20
·
Turning multifunction knob set treatment duration.
·
Press button.
AUTOMATIC COOKING
·
Power level and treatment duration are pre-set for some food.
·
Turn multifunctional knob to set suitable mode.
·
Press button.
LED display Indication Auto cooking menu Operation time, min:sec
1 Popcorn (85 g) 2:30
2 Popcorn (100 g) 2: 40
3 Pizza 1:00
4 Beverage (250 ml) 2:20
5 Beverage (500 ml) 4:40
6 Potatoes (0,45 kg) 7:12
7 Potatoes (0,65 kg) 10:12
8 Fish (0,45 kg) 6:30
DEFROST FUNCTION
·
Press button to choose suitable mode:
LED display Indication Auto defrosting menu Weight adjustment
D1 meat 100 g...2 kg
D2 poultry 100 g...3 kg
D3 seafood 100 g...900 g
·
Turn multifunction knob to set food weight.
·
Press button.
GRILL/COMBI
·
Pressing button select suitable mode.
·
Turn multifunctional regulator to set treatment duration.
·
Press button.