Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 99

Page: 99 / 187

Chapter 4: Document Imaging Basics

Click&Scan

Scantron

NSIGHT 20 Plus Scanner

•

Settings

: displays the Main Scanner window allowing

you to select a different Setting Shortcut for this

function. The new Setting Shortcut will be saved and

used by default each time the function is run.

•

: Closes the configuration dialog box. If you made

changes in the configuration dialog box and you did

not save your changes, a message appears.
•

Cancel

: Closes the Confirm dialog box without

saving any unapplied changes.

•

Yes

: Saves any changes made on the configuration

dialog box.

•

: Closes the configuration dialog box without

saving any changes.

Using Function Numbers

When you have assigned the function numbers, they can

be easily launched from the Click&Scan icon or from the

buttons on the front of the scanner

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands