Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 63

Page: 63 / 187

Chapter 3: Installation

Installing the iNSIGHT Scanner Utilities Software

Scantron

NSIGHT 20 Plus Scanner

Click

Install

to begin the installation. The Scanner

Driver Installation dialog appears.

Click

Next

NOTE:

The setup steps in the sections below detail

connecting the power cord and USB cable and

powering up the scanner and correspond to the steps

in the software installation program. These steps are

included here with additional information.

Connecting the Power Cord to the Scanner

Use only the power supply that was provided with your

Scantron

NSIGHT 20 Plus

Scanner. Do not substitute

another power supply model or another manufacturer’s

power supply.

After the drivers have been installed, use the following

procedure to connect the power supply and power cord to

the scanner. Make sure that the power outlet is located

within 5' (1.52 meters) of the scanner and is easily

accessible.

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands