4. Special Functions
Walk Test
You can set the system so that it will allow you to walk round the premises
and test each of the detectors (a walk test). Choose a time when the
premises are empty to carry out the test, otherwise people may trigger any
movement detectors before you do, and confuse the results of the test.
If any detector fails the test then call your alarm company and ask them to
check the system.
Note: If your system is fitted with 24 hour or personal attack detectors, you cannot
walk test them. If you wish to test them call your alarm company.
1.
Key in your access code.
The display shows "_ _"
2.
Press 9.
The display shows "- - " then "C" and the zone number of any
detector(s) that are already triggered.
3.
Walk round your premises and trigger each detector in turn (except 24
hour or personal attack detectors). As you trigger a detector the keypad
and internal sounder give a short tone, and the display shows the zone
number.
4.
Press
�
(Clear) twice to stop the test when you have triggered all the
detectors.
Note: You can abandon the test at any time by pressing
�
(Clear) twice.
496247 Issue 4
17
