Scantron SelfScore Operator'S Manual Download Page 51

Page: 51 / 120

Operator’s Guide

Ballots

•

Counts ballots and gives you results for student

elections, etc

Surveys

•

Tallies responses from teacher evaluations,

community surveys, etc

Prerequisites

•

Firmware version 8.0 or greater is required.

Printer Positioning

There are small triangles on the scanner printer ruler

indicating printer position locations.

When operating in Scantron Score emulation mode,

the printer position must be set to 2.5 inches and 6.2

inches to properly print the incorrect marks,

percentage, score, etc. on Scantron Score forms.

To position the printer, complete the following steps.

1. Unlatch and remove the printer cover by lifting

upon the handle and pulling the cover towards

you.

Summary of Contents for SelfScore
























































































































Search results

Summary of Contents for SelfScore

Reviews:

Related manuals for SelfScore

Brands by name

Popular brands

Scantron SelfScore, Operator'S Manual

Search results

Summary of Contents for SelfScore

Reviews:

Related manuals for SelfScore

Brands by name

Popular brands