Users / service manual for Scanomat Top Juicer
Vibe Allé 3 • Postboks 131 • 2980 Kokkedal.
Phone +45 49 18 18 00 • www.scanomat.dk
27
Automatic off:
If this setting is activated, your juice machine will automatically turn itself off, if has been inactive for
15 minutes.
Cup light:
Your juice machine may be equipped with a light illuminating the dispensed drinks. If this is the case,
it can be activated or deactivated by means of this function.
Carafes:
If your machine does not have the direct carafe buttons on the keyboard, the menu activated carafe
function can be activated or deactivated by this function.
NOTE:
If your machine is with the SERVICE KEY SYSTEME active, this CARAFES function
determines whether the carafes keys should be available for self service customers or not:
If carafes = OFF, carafe keys will only be available in SERVICE KEY MODE
Else they will be available always.
Mugs:
If your machine does not have the direct large button on the keyboard, the menu activated large
function can be activated or deactivated by this function.
Auto start:
If this function is active, pressing a selection button when your machine is off will cause it to turn on,
heat up, and dispense the selection when it is ready.
Adjust lock:
If adjust lock is activated, the menu system is locked out, so only carafe, large and read are available.
To enter the rest of the menu, the machine must be in SERVICE KEY mode. Note that setting this
function to active is irreversible, unless you have the option to go into SERVICE KEY mode.
Water tank:
Your juice machine may be equipped with as well external water supply as an internal cold-water
reservoir. If this is the case, selecting between these 2 options is done by this function.
Instant:
Not relevant for juice machine.
2 key clean:
If set to ON, the clean functions is activated by simultaneously pressing YES and CLEAN.
Queuing:
If set to ON the next drink can be ordered while the current one is being dispensed. The next drink will
then start immediately after the first one.
BT reset:
A function to reset the BlueTooth® module.
You should carry this function out after consulting a
Scanomat technician!
BT iOs Support:
Must be set to ON if running with Apple devices on the BlueTooth®
BT Visible:
